Easyarc 6013 Welding Electrodes
Easyarc 6013  Welding Electrodes Lincoln Electric MMA STICK WELDING ELECTRODES (SMAW) WELDING CONSUMABLES Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Suppliers, Supply, Supplies | Lincoln Energy Sdn Bhd
Quantity
Download Files
Easyarc_6013_en.pdf (1.39 MB)
Description

EASYARC™ 6013D

AWS A5.1-2004
E6013D

Diameter × Length (mm)
2.5 × 350, 3.2 × 350, 4.0 × 400, 5.0 × 400

Package
20kg/Carton

EASYARC™ 6013D is a rutile electrode, especially designed for vertical down welding of mild steel. It welds on AC or DC with excellent performance and easy restrike features.

ADVANTAGE LINCOLN

  • Vertical down welding capability
  • Excellent choice for sheet metal lap and fillet welds.
  • Easy slag removal.
  • Manufactured under a quality system certified to ISO9001 requirements.
PACKING

The electrodes are placed inside packets and then sealed in plastic. 4 packets of electrodes are then placed inside a carton. For large shipments, the cartons are securely stacked on wooden pallets and covered with shrink-wrap plastic.

NOTE

Charpy V-notch impact tests can exhibit considerable variability depending upon the base plate, welding procedure, V-Notch location within the weld, and many other factors. Please contact your Lincoln sales representative for results or recommendations if your application has special requirements or considerations.

DEPOSIT COMPOSITION


Requirements:
AWS E6013D(%)
%C %Mn %Si %S %P
0.20 1.20 1.00 Not Specified Not Specified
Typicle Values(%) 0.08 0.47 0.34 <0.020 <0.030


TYPICAL APPLICATION

EASYARC™ 6013D can be used for the welding of mild steel. Especially suitable for sheet metal welding, tack welding and other types of welding which require a smooth and clean bead appearance.

CONFORMANCE
AWS A5.1-2004 : E6013
ASME SFA-5.1 : E6013

GUIDELINES FOR USE
  • EASYARCTM™ 6013D electrodes normally do not require reconditioning before use if stored correctly.
  • If moisture appears to be a problem, redry electrodes from the opened containers in heated cabinets at 275±75°F (130±20°C) for 60-90 mins.
  • Clean the base metal.
  • For improved impact properties, avoid use of excessive amperage levels.

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version